Central Pump Automatic Leveling System (Bolt-On) AKC-E4502

 2008 and newer Ford E-450 chassis, older models  will require  additional drilling or can order the weld-on kit. Also check rear frame for two stage air suspension, as the brackets may require additional drilling or different brackets. 

Attention: Vehicles 5 years old or older, Measurement Required: Underneath the cab driver's area, locate the control arm mounting bracket for the front axle, just rearward of this bracket measure from the bottom of the vehicle frame to the ground (parked on level surface).  If this measurement is below 15" use the Ford E-350 part numbers as they have a shorter front cylinder for better ground clearance. If this is not done, the cylinders may be swapped out in the installation process time frame (fee applied).​ 

•  Simple, one touch operation for fully automatic leveling of the vehicle or trailer.​
• Bolt-on  installation!  Our patented design requires zero welding, the front cylinders bolt-on to the frame and the rear cylinders can be drilled or welded to the frame. 
• A  single Central Hydraulic Pump - an American made marine pump  &  motor wrapped in a steel housing - allows the unit to be mounted  outside  in the elements so it does not take up storage space.
• All-Up safety feature signals if one or more of the cylinders are not fully retracted before you drive off.
• Manual adjustment feature that allows you to operate each cylinder individually.
• Four powder coated cylinders made at our facility rated to lift 8,000 pounds per cylinder and come with a LIFETIME CYLINDER WARRANTY.
• All necessary components and hardware for a complete installation!

For system pricing, call us at 1-800-752-9815 to speak with a sales associate.